Its Box type of H shape design gives
more rigidity and makes zero deflection and lifelong smooth and precise job
operations. These frames consist of four box type pillars and can be operated
only in front of press and operate job size according to open windows. H Frame
design will increase tool life and precise job operation.
Tonnage Capacity – 50 to 800 Ton
Application: Used for Deep Draw, Blanking, Piercing, Cuttings and Manual
Stamping
Standard Accessories-
1.) Variable Stroke Adjustment With Limit Switch
2.) Pressure reversal hydraulic switches
3.) Die cushions
4.) Front Operator Control Box
5.) Stroke Counter
Optional Accessories-
1.) Movable Foot Switch
2.) Ejection cylinders
Features –
Quiet - Fewer moving parts and the elimination of a flywheel reduce the overall
noise level of hydraulic presses compared to mechanical presses. Properly sized
and properly mounted pumping units meet and exceed current Federal standards for
noise, even with the pump under full pressure.
Stroke Control - Stroke length can be set for any distance within the
stroke limits of the cylinder. Adjustments include: top of stroke, pre-slowdown
point, and bottom of stroke.
Dual Palm Button Controls - A common method of actuating hydraulic
presses. Both buttons must be depressed at the same time to bring the ram down
requiring the operator to use both hands. Control circuits include non-repeat
and anti-tie down features.
Dwell Timer - An adjustable timer to set the length of dwell at the
bottom of the stroke. The timer may be used for other functions such as timing a
sequence of press movement.
