TECHNICAL SPECIFICATION


Its Box type of H shape design gives more rigidity and makes zero deflection and lifelong smooth and precise job operations. These frames consist of four box type pillars and can be operated only in front of press and operate job size according to open windows. H Frame design will increase tool life and precise job operation.

Tonnage Capacity – 50 to 1000 ton
Application: Used for Deep Draw, Blanking, Piercing, Cuttings.

Standard Accessories-
1.) Variable Stroke Adjustment With Limit Switch
2.) Pressure reversal hydraulic switches
3.) Die cushions
4.) Front Operator Control Box
5.) Stroke Counter

Optional Accessories-
1.) Movable Foot Switch
2.) Ejection cylinders

Features–
Automatic (continuous) cycling

Quiet - Fewer moving parts and the elimination of a flywheel reduce the overall noise level of hydraulic presses compared to mechanical presses. Properly sized and properly mounted pumping units meet and exceed current Federal standards for noise, even with the pump under full pressure.
Stroke Control - Stroke length can be set for any distance within the stroke limits of the cylinder. Adjustments include: top of stroke, pre-slowdown point, and bottom of stroke.
Dual Palm Button Controls - A common method of actuating hydraulic presses. Both buttons must be depressed at the same time to bring the ram down requiring the operator to use both hands. Control circuits include non-repeat and anti-tie down features.

Double Acting Cylinders double acting cylinders which means you have lifting force as well as pressing forces. Any tooling attached to the ram can easily be raised with double acting cylinder.

Dwell Timer - An adjustable timer to set the length of dwell at the bottom of the stroke. The timer may be used for other functions such as timing a sequence of press movement.



Top